Sign up Latest Topics
 
 
 


Reply
  Author   Comment  
xcskier

Development Team Member
Registered:
Posts: 46
 #1 
I am noticing that when after I disconnect Moxy from a charger,
the battery charge can go down within a few minutes from four blinks
to two blinks. It'll most often lose all charge in a day or two.
Roger

Moderator
Registered:
Posts: 251
 #2 
Hi xcskier,

It's not uncommon for the sensor to drop to 3 blinks shortly after removing from the charger, but 2 blinks is not typical.

The sensors do discharge when they are turned off.  We will release a firmware update in the next week or so that will improve this slightly.  It's best to leave the sensor on the charger until you are ready to use it.

If you are getting less than 3 hours of run time on the sensor we will replace the battery for no charge if it's less than 2 years old.  If it's older than that, we will replace it for $75 including return shipping.
xcskier

Development Team Member
Registered:
Posts: 46
 #3 
One time I fully charged the sensors, by the time I was ready to try them
two hours later, I had two blinks left on one of them.

I have two sensors and one loses charge very quickly (without using it) 
and the other is still ok, but I don't think it lasts 3 hours when fully charged.



Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

HTML hit counter - Quick-counter.net